En
Contact Us

Products

IPC Series HMI Series PLC Remote IO CM4 Industrial Computer IoT Gateway SBC Extension Boards CPU Modules Display Cameras Accessories

Solutions

Custom Design

Branding & Labeling Mechanical Design Hardware Design Software Design Manufacturing Services CM4 Programming

Docs

Rpi Developer

Support

Technical Support Warranty FAQs System Integration Partner Profile Software Framework Provider Profile

Company

About us Contact us Company privacy News

Partners

Distributors System Integration Parnters Software Framework Provider
Select Region/Language
EN CN

ED-IPC3020

Home > Products > IPC Series

ED-IPC3020

High-performance Industrial Computer tailored for advanced automation and AI applications.

Key Featured
  • Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
  • 4GB and 8GB LPDDR4X-4267 SDRAM optional
  • Micro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card，M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD
  • 2.4GHz & 5GHz dual-band WiFi, Bluetooth and 4G
  • Dual 4Kp60 HDMI display output
  • Stereo audio input and output with separately 3.5mm audio jack
  • 1 x Gigabit ethernet port with optional PoE，2 x USB 3.0，2 x USB 2.0，1 x RS232，1 x RS485，1 x Buzzer
  • 5V DC power input via USB-C, support ON/OFF power button
  • Built-in RTC, support SuperCAP and CR1220 battery backup
  • -25℃~60℃
  • 102.8mm(W) x 89.5mm(D) x 32.5mm(H), about 300g，Fanless design with high-quality metal case and big heatsink, providing excellent cooling performance
  • The product verified with CE, FCC, RoHS certification
Online Docs

The ED-IPC3020 is an industrial computer designed with robustness and versatility in mind, featuring a Broadcom BCM2712 processor. This 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU provides exceptional performance, making the ED-IPC3020 well-suited for demanding industrial applications. The system is configurable with either 4GB or 8GB of LPDDR4X-4267 SDRAM, and storage can be expanded via a Micro SD Card or an M.2 NVMe SSD, offering flexibility in data management.

Visual capabilities are enhanced with dual 4Kp60 HDMI display outputs, allowing for high-resolution graphics and video. For audio, the ED-IPC3020 includes stereo input and output with a separate 3.5mm audio jack, enabling clear sound transmission. The interface panel is equipped with a Gigabit ethernet port with optional PoE support, two USB 3.0 ports, two USB 2.0 ports, one RS232, one RS485, and a buzzer, providing a comprehensive set of connectivity options.

Power to the ED-IPC3020 is supplied through a 5V DC input via a USB-C connector, and it includes a convenient ON/OFF power button. The system also includes a built-in RTC and supports backup power supply options with SuperCAP and a CR1220 battery, ensuring reliable operation even in the event of power loss.

The ED-IPC3020 is designed to operate in a wide temperature range from -25°C to 60°C, making it suitable for both indoor and outdoor industrial environments. Its fanless design, high-quality metal case, and large heatsink provide excellent cooling performance, ensuring stable operation under load.

The computer's front I/O includes audio output and input via 3.5mm audio jacks, an RS485 port with a 120Ω terminal resistor, an RS232 port, and dual USB 2.0 and USB 3.0 ports for data transfer. On the side, there are two Micro HDMI ports for connecting displays, and a USB Type-C connector for power input. Internally, the ED-IPC3020 features a 5V 1A DC output for external devices like LCD screens, a PA output for connecting stereo speakers, and MIPI CSI/DSI ports for extended display screens.

The ED-IPC3020 also includes expansion performance features such as an RTC with battery backup, and a buzzer for alarm functions. It has an input voltage of 5V DC and a maximum power consumption of 25W. With dimensions of 102.8mm x 89.5mm x 32.5mm and a weight of 300g, the ED-IPC3020 is compact and easy to install on a desk or other flat surfaces.

For wireless connectivity, the ED-IPC3020 offers dual-band 802.11ac Wi-Fi and Bluetooth 5.0, including Bluetooth Low Energy (BLE). The device has undergone rigorous environmental and regulatory testing, ensuring it can operate in a wide range of temperatures and humidity levels, and it carries certifications such as FCC and CE, making it compliant with international safety and emissions standards.

More Products
ModelProcessorEthernetRS232/485CANDI/DO4G/5G LTE SupportADCSupercapPoESSD
ED-IPC2000CM4x 1------√√
ED-IPC2100CM4x 2x 4--4G-√√√
ED-IPC2200CM4x 3---4G-√√√
ED-IPC2400CM4x 1x 4-----√√
ED-IPC2500CM4x 3---5G-√--
ED-IPC2610CM4x 2x 4-x 8 / x 84G-√√√
ED-IPC2620CM4x 2x 4x 1x 4 / x 44G-√√√
ED-IPC2630CM4x 2x 4x 2x 8 / x 84G-√√√
ED-IPC3100CM5x 2x 4--4G-√√√
ED-IPC3630CM5x 2x 4x 2x 8 / x 84G-√√√
ED-IPC3020Pi 5x 1x 2--4G-√√√
ED-CM4SENCM4x 1x 5x 1-4G----
ED-CM4IOCM4x 1------√√
ED-CM4MEDCM4x 1---4G----
ED-CM4INDCM4x 2x 3-x 34Gx 3-√√
ED-CM4NANOCM4x 1------√√
ED-SBC2300CM4x 2x 9--4G--√√
ED-SBC2300CM5x 2x 9--4G--√√


System Diagram
ED-IPC3020 Datasheet diagram-2024.05.21
Specification
System
CPUBroadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
VPU4Kp60 HEVC decoder
GPUOpenGL ES 3.1 & Vulkan 1.2
Memory4GB and 8GB LPDDR4X-4267 SDRAM are optional
StorageMicro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card
M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD
software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
Audio OUT1 x Audio Output (HPO), 3.5mm audio jack connector (green), stereo audio output.
Audio IN1 x Audio Input (LINE IN), 3.5mm audio jack connector (red), supporting stereo audio input.
RS4851 x RS485 port, 3-Pin 3.5mm pitch phoenix terminals with 120Ω terminal resistor. The signal is defined as GND/A/B.
RS2321 x RS232 port, 3-Pin 3.5mm pitch phoenix terminals, the signal is defined RS232 as GND/TX/RX.
USB 2.02 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps.
USB 3.02 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps.
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access thenetwork. PoE can be supported through expansion module.
Rear I/O
SD Card Slot1 x Micro SD card slot, which is used to install SD card. It supports booting the OS from SD card.
Side I/O
HDMI2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz
Power1 x power in port, USB Type-C connector, supporting 5V/5A DC power input.
*1: Some Micro HDMI cables have shorter Micro HDMI connectors, which may result in abnormal HDMI connections, so it is recommended to use Raspberry Pi's official Micro HDMI to standard HDMI cable, which can be purchased in the “Optional Accessory” section.
Buttons and Indicators
ON/OFF1 x power button, which is used to turn on and turn off the device.
PWR1 x red power indicator, using to check the status of device power-on and power-off.
ACT1 x green system indicator, using to check the working status of device.
COM1~COM22 x green UART indicators, which is used to check the communication status of UART port.
Expansion I/O
5V 1A1 x DC OUT, 3-Pin 2.0mm pitch WTB connector, supporting 5V 1A output.
These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
Speaker1 x PA output, 4-Pin 1.5mm pitch WTB connector, dual channel stereo audio output.
It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R+/R-/L+/L-.
MIPI CSI/DSI2 x MIPI CSI/DSI ports, 2-Lane CSI/DSI signal. They are reserved for connecting extended LCD screen, supporting I2C touchscreen and backlight adjustment.
M.2 M1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.
It is compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD.
Expansion Performance
RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off.
We also provide a battery base, and you can buy a CR1220 battery backup for RTC.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Electrical Characteristics
Input Voltage5V DC
Power Consumption25W (Max)
Mechanical Characteristics
Dimensions102.8mm x 89.5mm x 32.5mm (WxDxH, antennas are not included.)
Weight300g
InstallationPlacing on the desk
Wireless
Wi-FiDual-band 802.11ac Wi-Fi
BluetoothBluetooth 5.0 / Bluetooth Low Energy (BLE)
Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
CertificationsFCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
Mechanicals

Unit: mm

ED-IPC3020 Datasheet dimensions-2024.05.21
Ordering Code
ED-IPC3020 Datasheet ordering code-2024.05.21
Docs
Type Title Publish Time
Datasheet ED-IPC3020 Datasheet 2024-04-10
Manual ED-IPC3020 User Manual 2024-04-10
OS ED-IPC3020 Installing OS 2024-04-10
Software Optimization for noise problem on ED-IPC3020&ED-HMI3020 2024-04-10
CE Report ED-IPC3020 CE Report 2024-04-10
RoHS Certification ED-IPC3020 RoHS Certification 2024-04-10
RoHS Report ED-IPC3020 RoHS Report 2024-04-10
FCC Certification ED-IPC3020 FCC Certification 2024-04-10
FCC Report ED-IPC3020 FCC Report 2024-04-10
EU Declaration ED-IPC3020 EU Declaration 2024-04-10
Related Products
Raspberry Pi Global Shutter Camera

The Raspberry Pi Global Shutter Camera is a high-speed, distortion-free imaging module designed for precise capture of fast motion, featuring a 1.6-megapixel Sony sensor and global shutter technology.

CM4 Industrial

CM4 Industrial is a versatile and robust embedded computer based on the Raspberry Pi Compute Module 4, offering various RAM and storage options, a wide range of industrial communication interfaces, and support for diverse display and camera functionalities.


ED-HMI3020 Series

ED-HMI3020 is a high-performance industrial HMI panel PC with a BCM2712 quad-core processor, dual 4K HDMI outputs, rich connectivity options, and support for Raspberry Pi OS, designed for reliable operation in extreme temperatures.

ED-IPC2600 Series

ED-IPC2600 series is a robust set of industrial computers based on Raspberry Pi CM4, offering various models with different I/O configurations, dual Ethernet ports, isolated serial communication interfaces, and support for advanced control systems through optional CODESYS compatibility.

EDATEC

Started in 2017, EDATEC has been certified as one of the global design partners of Raspberry Pi since 2018, providing Raspberry Pi based industrial computers design and manufacturing services for global customers.

  • Building 29, No. 1661, Jialuo Road, Jiading District, Shanghai.
  • CN: +86-18217351262 (Iris Zhou)
    US: +1 859-653-0800 (Randall Restle)
  • support@edatec.cn
Submit Your Message

INFO

By submitting, you agree to EDATEC's policies
NO
YES

GitHub

Phone

For enquiry or purchase of our products, please contact us:
CN: Iris Zhou
Tel: +86-18217351262
E-mail: izhou@edatec.cn

US: Randall Restle
Tel: +1 859-653-0800
E-mail: randall@edatec.cn

Form

Subscribe

Please enter the verification code

captcha
取消
确认
0.961060s