En
Contact Us

Products

IPC Series HMI Series PLC Remote IO CM4 Industrial Computer IoT Gateway SBC Extension Boards CPU Modules Display Cameras Accessories

Solutions

Custom Design

Branding & Labeling Mechanical Design Hardware Design Software Design Manufacturing Services CM4 Programming

Docs

Rpi Developer

Support

Technical Support Warranty FAQs System Integration Partner Profile Software Framework Provider Profile

Company

About us Contact us Company privacy News

Partners

Distributors System Integration Parnters Software Framework Provider
Select Region/Language
EN CN

ED-HMI2630-101C

Home > Products > HMI Series

ED-HMI2630-101C

ED-HMI2630-101C is an advanced industrial HMI with a 10.1" touchscreen, quad-core processing, and extensive I/O capabilities for resilient operation in extreme temperatures.

Key Featured
  • Broadcom BCM2711, quad-core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • Up to 8GB LPDDR4 RAM and 32GB eMMC storage
  • Support Micro SD card and M.2 NVMe SSD storage expansion
  • Dual Lans, 1 x Gigabit Ethernet and 1 x 100M Ethernet
  • 4 x isolated RS232/485 with electrostatic and surge protection
  • 2 x isolated CAN with LED indicator, support CAN 2.0B standard
  • 8 x isolated DI with LED indicator, support AC input
  • 8 x isolated DO with LED indicator, support overcurrent protection
  • 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth, and 4G LTE
  • Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection, and overcurrent protection
  • Integrated supercapacitor (backup power supply, optional), RTC, Watch Dog, EEPROM, and crypto authentication
  • Embedded installation, compatible with VESA standard bracket installation
Online Docs

ED-HMI2630-101C is a robust 10.1" industrial HMI device that brings a high level of functionality and versatility to industrial control systems. This device features a multi-point capacitive touch screen with a resolution of 1280x800, providing clear and responsive interaction. At its core is a powerful Broadcom BCM2711 processor, a quad-core Arm Cortex-A72 64-bit SoC running at 1.5GHz, which ensures smooth operation even for the most demanding applications.

ED-HMI2630-101C comes with up to 8GB of LPDDR4 RAM and up to 32GB of eMMC storage, offering ample memory for running complex applications and storing data. It also supports expansion via a Micro SD card and an M.2 NVMe SSD, allowing for even greater storage flexibility. Network connectivity is well catered for with dual Ethernet ports, including one Gigabit port and one 100M port, ensuring reliable network integration.

This HMI device offers advanced communication capabilities with 4 isolated RS232/485 channels and 2 isolated CAN channels that support the CAN 2.0B standard. It also features 8 isolated digital inputs (DI) and 8 isolated digital outputs (DO), enhancing its adaptability in various control scenarios. For wireless connectivity, the ED-HMI2630-101C supports 2.4GHz and 5GHz dual-band WiFi, Bluetooth, and 4G LTE, making it suitable for applications requiring remote access or data transmission.

Power to the device is supplied through a wide voltage range of DC 9V to 36V, with built-in protection against reverse polarity, overvoltage, and overcurrent. An optional integrated supercapacitor ensures a backup power supply, and the device also includes an RTC, Watch Dog, EEPROM, and crypto authentication for enhanced reliability and security.

ED-HMI2630-101C is designed for easy integration into industrial setups, with an embedded front installation compatible with VESA standard bracket mounting. It operates over a wide temperature range of -20°C to 60°C, making it suitable for both indoor and outdoor environments. The device also features a variety of I/O options, including USB 2.0 and 3.0 ports, an HDMI port supporting 4K 60Hz, and antenna connections for wireless communication.

ED-HMI2630-101C runs on the Raspberry Pi OS, offering both 32-bit and 64-bit versions for flexibility, and supports a range of applications and customization options. With its comprehensive feature set and robust design, ED-HMI2630-101C is an excellent choice for applications that require a high degree of connectivity, processing power, and reliability in industrial automation and control systems.

More Products
ED-HMI Series Selection Guide
Model No.CPULCD SizeAudio Input & Output#EthernetRS485/RS2324GSSDDI/DOSupercaps
ED-HMI2002Pi 47"/10.1"√x 1-----
ED-HMI2020CM47"/10.1"√x 1-----
ED-HMI2120CM47"/10.1"√x 2√√√-√
ED-HMI2220CM47"/10.1"√x 3-√√-√
ED-HMI2320CM412.1"/15"/15.6"/17"/21.5"√x 1 or x 2√√√--
ED-HMI2630CM410.1"√x 2√√√√√
ED-HMI3010Pi 57"/10.1"-x 1-----
ED-HMI3020Pi 57"/10.1"√x 1√-√--


System Diagram
hmi2630-101c-diagram
Specification
System
CPUBroadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPU H.265 (HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
StorageOptions for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion)
M.2 NVMe SSD (options for 128GB, 256GB, 512GB)
Software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
CameraBuilt-in 8-megapixel front camera (optional)
Side I/O
Power1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.
It supports 9V~36V input, the signal is defined as VIN+/GND.
RS485/23212-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection.
Different numbers of RS232 and RS485 ports can be selected according to actual application.
The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
  • ED-HMI2632-101C: 2 x RS485 + 2 x RS232
  • ED-HMI2633-101C: 3 x RS485 + 1 x RS232
  • ED-HMI2634-101C: 4 x RS485
Audio1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.
  • When a headphone is connected, the audio output switches to the headphone.
  • When no headphone is connected, the audio output switches to the speaker.
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
100M Ethernet1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network.
CAN2 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals.
  • Isolation Protection: 3 KV
  • CAN Protocol: CAN 2.0B
  • Baud Rate: 10~1000 kbps
  • Signals: CANH, CANL, GND
DI 8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: Wet Contact (NPN & PNP), Dry Contact
  • Isolation Protection: 5 KV
  • Every 4 DI share one common pin (called COM):
    X0, X2, X4 and X6 share COMX0; X1,X3, X5 and X7 share COMX1
  • DI to COM:
    ON: 5~30 VDC or -30~-5 VDC
    OFF: 0~2 VDC or -2~0 VDC
DO8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: NPN
  • Isolation Protection: 5 KV
  • Output: 5~36 VDC (24 VDC is recommended), maximum current is 1.5A (per channel)
SD Card Slot1 x Micro SD card slot, which is used to install Micro SD card for storing user data.
SIM Card Slot1 x Nano SIM card slot, which is used to install Nano SIM card for getting 4G signal.
Micro USB1 x PROGRAMMING port, which supports to flash to eMMC for the system.
HDMI1 x HDMI port, Type-A connector. It is compatible with HDMI 2.0 and supports 4K 60Hz.
USB 2.02 x USB 2.0 ports, Type-A connector, supporting up to 480Mbps.
Antenna2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antenna.
Speaker1 x PA output, built-in a 4Ω 3W speaker.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
PWR1 x red power indicator, which is used to check the status of device power-on and power-off.
4G1 x green 4G indicator, which is used to check the status of 4G signal.
ACT1 x green system indicator, which is used to check the working status of device.
USER1 x green user indicator, user can customize a status according to actual application.
COM1~COM44 x green UART indicators, using to check the communication status of UART ports.
CAN0~CAN12 x green CAN indicators, using to check the communication status of CAN ports.
X0~X78 x green DI indicators, using to check the input status of DI ports.
Y0~Y78 x green DO indicators, using to check the output status of DO ports.
Internal I/O
M.2 B1 x M.2 B, M.2 B Key connector, supporting to connect SSD.
It is compatible with M.2 2230 and M.2 2242.
Expansion Functions
EEPROMIt supports 4K byte storage and improves the ease of use of device.
Crypto AuthenticationIt can be matched to realize the required upper layer application and improves the security of device.
RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off.
We also provide a battery base, and you can buy a CR1220 battery backup for RTC.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Watch Dog*This function has been reserved on hardware. But we need additional software to support it, which is under development.
LCD
LCD Size10.1" TFT
Resolution1280 x 800
Color Number16.7M
Active Area216.576mm (H) x 135.36mm (V)
BacklightLED
MTBF>30000h
Luminance400cd/m2
Contrast Ratio1000:1
Response Time30ms
Viewing Angle (CR≥10)80° (L) / 80° (R) / 80° (U) / 80° (D)
Touch Screen
TypeCapacitive Touch Screen
Multi-touchUp to 10 points
Communication MethodI2C
Transmittance≥85％
Surface Hardness6H
Electrical Characteristics
Input Voltage9V ~ 36V DC
Power Consumption24W (Max)
Mechanical Characteristics
Dimensions258mm x 172mm x 61.5mm (WxDxH, antenna is not included.)
Weight1.3Kg
InstallationEmbedded front installation
Wireless
Wi-Fi/Bluetooth (optional) 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • The Bluetooth supports 2402MHz ~ 2480MHz frequency
4G (optional) Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
  • EC20-CE Module (China/India)
    • LTE FDD: B1/B3
    • LTE TDD: B38/B39/B40/B41
    • TDSCDMA: B34/B39
    • WCDMA: B1
    • CDMA 1x/EVDO: BC0
    • GSM: 900/1800MH
    • GPS/GLONASS/BDS/Galileo/QZSS (optional)
  • EC25-AFX Module (North America)
    • LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
    • LTE TDD
    • WCDMA: B2/B4/B5
    • GSM/EDGE
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-AUX Module (Latin America/Australia/New Zealand)
    • LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
    • LTE TDD: B40
    • WCDMA: B1/B2/B4/B5/B8
    • GSM/EDGE: B2/B3/B5/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EUX Module (Europe/Middle East/Africa/Thailand)
    • LTE FDD: B1/B3/B7/B8/B20/B28A
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EM Module (Europe/Middle East/Africa/South-East Asia)
    • LTE FDD: B1/B3/B7/B8/B20/B28
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B5/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
Environmental & Regulatory
Operating Temperature-20°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
Mechanicals

Unit: mm

ED-HMI2220-070C-DatasheetDimensions-2024.05.21
Ordering Code
hmi2630-101c-orderingcode
Docs
Type Title Publish Time
Datasheet ED-HMI2630-101C Datasheet 2024-04-10
Manual ED-HMI2630-101C User Manual 2024-04-10
OS ED-HMI2630-101C Installing OS 2024-04-10
Related Products
ED-HMI2120 Series

The ED-HMI2120 is a high-performance HMI device featuring a powerful quad-core processor, multiple connectivity options, and a choice between 7.0" and 10.1" touchscreen displays for industrial applications.

Raspberry Pi Global Shutter Camera

The Raspberry Pi Global Shutter Camera is a high-speed, distortion-free imaging module designed for precise capture of fast motion, featuring a 1.6-megapixel Sony sensor and global shutter technology.

CM4 Sensing

CM4 Sensing is a versatile industrial IoT and data acquisition computer based on the Raspberry Pi Compute Module 4, featuring robust wireless communication, multiple serial interfaces, and wide temperature operation capabilities.

ED-IPC3020

The ED-IPC3020 is a high-performance, fanless industrial computer with a powerful Broadcom BCM2712 CPU, dual 4K HDMI outputs, and a wide range of I/O options, designed for reliable operation in extreme temperature environments.


Videos
ED-HMI Applications Video

EDATEC

Started in 2017, EDATEC has been certified as one of the global design partners of Raspberry Pi since 2018, providing Raspberry Pi based industrial computers design and manufacturing services for global customers.

  • Building 29, No. 1661, Jialuo Road, Jiading District, Shanghai.
  • CN: +86-18217351262 (Iris Zhou)
    US: +1 859-653-0800 (Randall Restle)
  • support@edatec.cn
Submit Your Message

INFO

By submitting, you agree to EDATEC's policies
NO
YES

GitHub

Phone

For enquiry or purchase of our products, please contact us:
CN: Iris Zhou
Tel: +86-18217351262
E-mail: izhou@edatec.cn

US: Randall Restle
Tel: +1 859-653-0800
E-mail: randall@edatec.cn

Form

Subscribe

Please enter the verification code

captcha
取消
确认
1.374429s