Select Region/Language
EN CN

ED-IPC2600 Series

ED-IPC2600 Series

Control-oriented Industrial Computer with multi-channel DI/DO, specialized in complex control systems.

Key Featured
  • Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • Up to 8GB LPDDR4 RAM and 32GB eMMC storage
  • Support Micro-SD Card and M.2 NVMe SSD storage expansion
  • Dual Lans, 1 x Gigabit Ethernet and 1 x 100M Ethernet
  • 2 x isolated RS232 & 2 x isolated RS485 with electrostatic and surge protection
  • 8 x isolated DI with led indicator, support AC input
  • 8 x isolated DO with led indicator, support overcurrent protection
  • 2.4GHz and 5GHz dual-band WiFi, Bluetooth and 4G LTE
  • Wide voltage power input range of DC 9V~36V with reverse polarity protection,overvoltage protection and overcurrent protection
  • Integrated supercapacitor(backup power supply,optional) , RTC, Watch Dog,EEPROM and crypto authentication
  • Wide temperature range of -25℃~60℃ for working environment
  • High-quality metal case, compatible with DIN-rail installation
  • The product verified with CE, FCC, RoHS certification
IPC2600 Series Selection Guide
Model No.CANDIDO
IPC2610-x 8x 8
IPC2620x 1x 4x 4
IPC2630x 2x 8x 8


The ED-IPC2600 series represents a formidable line of industrial computers built upon the Raspberry Pi CM4 platform, engineered to deliver high reliability in tough industrial environments. These computers are equipped with a powerful Broadcom BCM2711 processor, which features a quad-core Cortex-A72 CPU based on the 64-bit ARM v8 architecture, running at a speed of 1.5GHz. They also offer up to 8GB of LPDDR4 RAM and up to 32GB of eMMC storage, with the added flexibility of Micro-SD Card and M.2 NVMe SSD support for storage expansion.

The ED-IPC2600 series boasts dual Ethernet connectivity, with one Gigabit Ethernet port and one 100M Ethernet port, providing robust network capabilities. For serial communication, these units feature 2 isolated RS232 and 2 isolated RS485 interfaces, complete with electrostatic and surge protection. Depending on the model, they also offer a varying number of isolated digital inputs (DI) and digital outputs (DO), all equipped with LED indicators and protection for overcurrent and electrostatic discharge.

Models within the series, such as the IPC2610, IPC2620, and IPC2630, differ in the number of CAN buses they provide, with the IPC2610 featuring none, the IPC2620 offering one, and the IPC2630 delivering two. All models support the CAN 2.0B standard and come with 8 isolated DI and 8 isolated DO, except for the IPC2620 which provides 4 of each.

Wireless connectivity is well catered for with dual-band 2.4GHz and 5GHz WiFi, Bluetooth, and 4G LTE capabilities. Power is supplied through a wide voltage range of DC 9V to 36V, with comprehensive protection against reverse polarity, overvoltage, and overcurrent. An optional integrated supercapacitor ensures a backup power supply, and features like an RTC, watchdog timer, EEPROM, and crypto authentication contribute to the device's reliability and security.

The ED-IPC2600 series is designed to operate in a wide temperature range from -25℃ to 60℃, making them suitable for both indoor and outdoor applications. The high-quality metal case construction provides excellent heat dissipation and is compatible with DIN-rail installation, making it easy to integrate into existing industrial setups.

Optional CODESYS compatibility adds an advanced layer to the ED-IPC2600 series, supporting IEC 61131-3 programming for complex control systems, although this functionality is an optional add-on and interested customers are advised to contact EDATEC for further details. Overall, the ED-IPC2600 series is a versatile and robust solution for a wide array of industrial computing needs.

More Products
ModelProcessorEthernetRS232/485CANDI/DO4G/5G LTE SupportADCSupercapPoESSD
ED-IPC2000CM4x 1------
ED-IPC2100CM4x 2x 4--4G-
ED-IPC2200CM4x 3---4G-
ED-IPC2400CM4x 1x 4-----
ED-IPC2500CM4x 3---5G---
ED-IPC2610CM4x 2x 4-x 8 / x 84G-
ED-IPC2620CM4x 2x 4x 1x 4 / x 44G-
ED-IPC2630CM4x 2x 4x 2x 8 / x 84G-
ED-IPC3100CM5x 2x 4--4G-
ED-IPC3630CM5x 2x 4x 2x 8 / x 84G-
ED-IPC3020Pi 5x 1x 2--4G-
ED-CM4SENCM4x 1x 5x 1-4G----
ED-CM4IOCM4x 1------
ED-CM4MEDCM4x 1---4G----
ED-CM4INDCM4x 2x 3-x 34Gx 3-
ED-CM4NANOCM4x 1------
ED-SBC2300CM4x 2x 9--4G--
ED-SBC2300CM5x 2x 9--4G--


System Diagram
    1
  • IPC2610
  • 2
  • IPC2620
  • 3
  • IPC2630
ED-IPC2610-diagram
ED-IPC2620-diagram
ipc2630-diagram
Specification
  • IPC2610
  • IPC2620
  • IPC2630
System
CPUBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPUH.265 (HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
StorageOptions for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion)
M.2 NVMe SSD (options for 128GB, 256GB, 512GB)
Software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
Power1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN+/GND.
RS485/23212-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
  • ED-IPC2612:2 x RS485 + 2 x RS232
  • ED-IPC2613:3 x RS485 + 1 x RS232
  • ED-IPC2614:4 x RS485
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
100M Ethernet1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network.
DI8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: Wet Contact (NPN & PNP), Dry Contact
  • Isolation Protection: 5 KV
  • Every 4 DI share one common pin (called COM): X0, X2, X4 and X6 share COMX0; X1, X3, X5 and X7 share COMX1
  • DI to COM:
    ON: 5~30 VDC or -30~-5 VDC
    OFF: 0~2 VDC or -2~0 VDC
DO8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: NPN
  • Isolation Protection: 5 KV
  • Output: 5~36 VDC (24 VDC is recommended), maximum current is 1.5A (per channel)
Rear I/O
SD Card Slot1 x Micro SD card slot, which is used to install SD card for storing user data.
SIM Card Slot1 x Nano SIM card slot, which is used to install SIM card for getting 4G signal.
Micro USB1 x Micro USB port, which supports to flash to eMMC for the system.
Side I/O
HDMI1 x HDMI port, type A connector. It is compatible with HDMI 2.0 standard and supports 4K 60Hz.
USB 2.02 x USB 2.0 ports, type A connector, supporting up to 480Mbps transmission rate.
Antenna2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antenna.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
PWR1 x red power indicator, which is used to check the status of device power-on and power-off.
4G1 x green 4G indicator, which is used to check the status of 4G signal.
ACT1 x green system indicator, which is used to check the working status of device.
USER1 x green user indicator, user can customize a status according to actual application.
COM1~COM44 x green UART indicators, using to check the communication status of UART ports.
X0~X78 x green DI indicators, using to check the input status of DI ports.
Y0~Y78 x green DO indicators, using to check the output status of DO ports.
Expansion I/O
12V 1A3 x DC OUT, 2-Pin 2.0mm pitch WTB connector, supporting 12V 1A output. These pins are defined as GND/12V, reserving to provide power supply for extended LCD.
5V 1A1 x DC OUT, 3-Pin 2.0mm pitch WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
10-Pin GPIO1 x GPIO Pin Header, 2x5-Pin 2.54mm pitch header, using to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.
USB 2.01 x USB 2.0, 5-Pin 1.5mm pitch WTB connector, supporting to expand the USB 2.0 port.
M.2 B1 x M.2 B, M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD.
Expansion Performance
EEPROMSupports 4K byte storage and improves the ease of use of device.
Encryption chipIt can be matched to realize the required upper layer application and improves the security of device.
RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Watch DogThis function has been reserved on hardware. But we need additional software to support it, which is under development.
Electrical Characteristics
Input Voltage9V ~ 36V DC
Power Consumption24W
Mechanical Characteristics
Dimensions143mm x 100mm x 55mm (WxDxH, DIN-rail and antenna are not included.)
Weight1Kg
InstallationDIN-rail mounting
Wireless
Wi-Fi/Bluetooth (optional)2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • The Bluetooth supports 2402MHz ~ 2480MHz frequency.
4G (optional)Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
  • EC20-CE Module (China/India)
    • LTE FDD: B1/B3
    • LTE TDD: B38/B39/B40/B41
    • TDSCDMA: B34/B39
    • WCDMA: B1
    • CDMA 1x/EVDO: BC0
    • GSM: 900/1800MH
    • GPS/GLONASS/BDS/Galileo/QZSS (optional)
  • EC25-AFX Module (North America)
    • LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
    • LTE TDD
    • WCDMA: B2/B4/B5
    • GSM/EDGE
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-AUX Module (Latin America/Australia/New Zealand)
    • LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
    • LTE TDD: B40
    • WCDMA: B1/B2/B4/B5/B8
    • GSM/EDGE: B2/B3/B5/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EUX Module (Europe/Middle East/Africa/Thailand)
    • LTE FDD: B1/B3/B7/B8/B20/B28A
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EM Module (Europe/Middle East/Africa/South-East Asia)
    • LTE FDD: B1/B3/B7/B8/B20/B28
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B5/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
CertificationsFCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
System
CPUBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPUH.265 (HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
StorageOptions for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion)
M.2 NVMe SSD (options for 128GB, 256GB, 512GB)
Software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
Power1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN+/GND.
RS485/23212-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
  • ED-IPC2622:2 x RS485 + 2 x RS232
  • ED-IPC2623:3 x RS485 + 1 x RS232
  • ED-IPC2624:4 x RS485
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
100M Ethernet1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network.
CAN1 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals
  • Isolation Protection: 3 KV
  • CAN Protocol: CAN 2.0B
  • Baud Rate: 10~1000 kbps
  • Signals: CANH, CANL, GND
DI4 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: Wet Contact (NPN & PNP), Dry Contact
  • Isolation Protection: 5 KV
  • 4 DI share one common pin (called COM): X0, X2, X4 and X6 share COMX0
  • DI to COM:
    ON: 5~30 VDC or -30~-5 VDC
    OFF: 0~2 VDC or -2~0 VDC
DO4 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: NPN
  • Isolation Protection: 5 KV
  • Output: 5~36 VDC (24 VDC is recommended), maximum current is 1.5A (per channel)
Rear I/O
SD Card Slot1 x Micro SD card slot, which is used to install SD card for storing user data.
SIM Card Slot1 x Nano SIM card slot, which is used to install SIM card for getting 4G signal.
Micro USB1 x Micro USB port, which supports to flash to eMMC for the system.
Side I/O
HDMI1 x HDMI port, type A connector. It is compatible with HDMI 2.0 standard and supports 4K 60Hz.
USB 2.02 x USB 2.0 ports, type A connector, supporting up to 480Mbps transmission rate.
Antenna2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antenna.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
PWR1 x red power indicator, which is used to check the status of device power-on and power-off.
4G1 x green 4G indicator, which is used to check the status of 4G signal.
ACT1 x green system indicator, which is used to check the working status of device.
USER1 x green user indicator, user can customize a status according to actual application.
COM1~COM44 x green UART indicators, using to check the communication status of UART ports.
CAN01 x green CAN indicator, using to check the communication status of CAN port.
X0,X2,X4,X64 x green DI indicators, using to check the input status of DI ports.
Y0,Y2,Y4,Y64 x green DO indicators, using to check the output status of DO ports.
Expansion I/O
12V 1A3 x DC OUT, 2-Pin 2.0mm pitch WTB connector, supporting 12V 1A output. These pins are defined as GND/12V, reserving to provide power supply for extended LCD.
5V 1A1 x DC OUT, 3-Pin 2.0mm pitch WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
10-Pin GPIO1 x GPIO Pin Header, 2x5-Pin 2.54mm pitch header, using to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.
USB1 x USB 2.0, 5-Pin 1.5mm pitch WTB connector, supporting to expand the USB 2.0 port.
M.2 B1 x M.2 B, M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD.
Expansion Performance
EEPROMSupports 4K byte storage and improves the ease of use of device.
Encryption chipIt can be matched to realize the required upper layer application and improves the security of device.
RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Watch DogThis function has been reserved on hardware. But we need additional software to support it, which is under development.
Electrical Characteristics
Input Voltage9V ~ 36V DC
Power Consumption24W (Max)
Mechanical Characteristics
Dimensions143mm x 100mm x 55mm (WxDxH, DIN-rail and antenna are not included.)
Weight1Kg
InstallationDIN-rail mounting
Wireless
Wi-Fi/Bluetooth (optional)2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • The Bluetooth supports 2402MHz ~ 2480MHz frequency.
4G (optional)Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
  • EC20-CE Module (China/India)
    • LTE FDD: B1/B3
    • LTE TDD: B38/B39/B40/B41
    • TDSCDMA: B34/B39
    • WCDMA: B1
    • CDMA 1x/EVDO: BC0
    • GSM: 900/1800MH
    • GPS/GLONASS/BDS/Galileo/QZSS (optional)
  • EC25-AFX Module (North America)
    • LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
    • LTE TDD
    • WCDMA: B2/B4/B5
    • GSM/EDGE
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-AUX Module (Latin America/Australia/New Zealand)
    • LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
    • LTE TDD: B40
    • WCDMA: B1/B2/B4/B5/B8
    • GSM/EDGE: B2/B3/B5/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EUX Module (Europe/Middle East/Africa/Thailand)
    • LTE FDD: B1/B3/B7/B8/B20/B28A
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EM Module (Europe/Middle East/Africa/South-East Asia)
    • LTE FDD: B1/B3/B7/B8/B20/B28
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B5/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
CertificationsFCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
System
CPUBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPUH.265 (HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
StorageOptions for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion)
M.2 NVMe SSD (options for 128GB, 256GB, 512GB)
Software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
Power1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes. It supports 9V~36V input, the signal is defined as VIN+/GND.
RS485/23212-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
  • ED-IPC2632:2 x RS485 + 2 x RS232
  • ED-IPC2633:3 x RS485 + 1 x RS232
  • ED-IPC2634:4 x RS485
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
100M Ethernet1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network.
CAN2 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals
  • Isolation Protection: 3 KV
  • CAN Protocol: CAN 2.0B
  • Baud Rate: 10~1000 kbps
  • Signals: CANH, CANL, GND
DI8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: Wet Contact (NPN & PNP), Dry Contact
  • Isolation Protection: 5 KV
  • Every 4 DI share one common pin (called COM): X0, X2, X4 and X6 share COMX0; X1, X3, X5 and X7 share COMX1
  • DI to COM:
    ON: 5~30 VDC or -30~-5 VDC
    OFF: 0~2 VDC or -2~0 VDC
DO8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
  • Sensor Type: NPN
  • Isolation Protection: 5 KV
  • Output: 5~36 VDC (24 VDC is recommended), maximum current is 1.5A (per channel)
Rear I/O
SD Card Slot1 x Micro SD card slot, which is used to install Micro SD card for storing user data.
SIM Card Slot1 x Nano SIM card slot, which is used to install Nano SIM card for getting 4G signal.
Micro USB1 x Micro USB port, which supports to flash to eMMC for the system.
Side I/O
HDMI1 x HDMI port, Type-A connector. It is compatible with HDMI 2.0 standard and supports 4K 60Hz.
USB 2.02 x USB 2.0 ports, Type-A connector, supporting up to 480Mbps transmission rate.
Antenna2 x SMA ports (optional), using to connect 4G antenna and Wi-Fi/BT antenna.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
PWR1 x red power indicator, which is used to check the status of device power-on and power-off.
4G1 x green 4G indicator, which is used to check the status of 4G signal.
ACT1 x green system indicator, which is used to check the working status of device.
USER1 x green user indicator, user can customize a status according to actual application.
COM1~COM44 x green UART indicators, using to check the communication status of UART ports.
CAN0~CAN12 x green CAN indicators, using to check the communication status of CAN ports.
X0~X78 x green DI indicators, using to check the input status of DI ports.
Y0~Y74 x green DO indicators, using to check the output status of DO ports.
Internal I/O
M.2 B1 x M.2 B, M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD.
Expansion Functions
EEPROMSupports 4K byte storage and improves the ease of use of device.
Crypto AuthenticationIt can be matched to realize the required upper layer application and improves the security of device.
RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Watch Dog*This function has been reserved on hardware. But we need additional software to support it, which is under development.
Electrical Characteristics
Input Voltage9V ~ 36V DC
Power Consumption24W (Max)
Mechanical Characteristics
Dimensions143mm x 100mm x 55mm (WxDxH, DIN-rail and antenna are not included.)
Weight1kg
InstallationDIN-rail mounting
Wireless
Wi-Fi/Bluetooth (optional)2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • The Bluetooth supports 2402MHz ~ 2480MHz frequency.
4G (optional)Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
  • EC20-CE Module (China/India)
    • LTE FDD: B1/B3
    • LTE TDD: B38/B39/B40/B41
    • TDSCDMA: B34/B39
    • WCDMA: B1
    • CDMA 1x/EVDO: BC0
    • GSM: 900/1800MH
    • GPS/GLONASS/BDS/Galileo/QZSS (optional)
  • EC25-AFX Module (North America)
    • LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
    • LTE TDD
    • WCDMA: B2/B4/B5
    • GSM/EDGE
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-AUX Module (Latin America/Australia/New Zealand)
    • LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
    • LTE TDD: B40
    • WCDMA: B1/B2/B4/B5/B8
    • GSM/EDGE: B2/B3/B5/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EUX Module (Europe/Middle East/Africa/Thailand)
    • LTE FDD: B1/B3/B7/B8/B20/B28A
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
  • EC25-EM Module (Europe/Middle East/Africa/South-East Asia)
    • LTE FDD: B1/B3/B7/B8/B20/B28
    • LTE TDD: B38/B40/B41
    • WCDMA: B1/B5/B8
    • GSM/EDGE: B3/B8
    • GPS/GLONASS/BDS/Galileo/QZSS
Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
CertificationsFCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
Mechanicals
  • IPC2610
  • IPC2620
  • IPC2630

Unit: mm

ED-IPC2610-dimensions

Unit: mm

ED-IPC2620-dimensions

Unit: mm

ED-IPC2630-dimensions
Ordering Code
  • IPC2610
  • IPC2620
  • IPC2630
ED-IPC2610-ordering
ED-IPC2620-ordering
ED-IPC2630-ordering
Docs
Type Title Publish Time
Datasheet ED-IPC2610 Datasheet 2024-04-10
OS ED-IPC2610 Installing OS 2024-04-10
Datasheet ED-IPC2620 Datasheet 2024-04-10
OS ED-IPC2620 Installing OS 2024-04-10
Datasheet ED-IPC2630 Datasheet 2024-04-10
OS ED-IPC2630 Installing OS 2024-04-10
Manual ED-IPC2600 User Manual 2024-04-10
Software Optimization for CAN bus abnormality-en 2024-04-10
Software How to enable safty power off by on-board SuperCAP module 2024-04-10
CE Certification ED-IPC2600 CE Certification 2024-04-10
CE Report ED-IPC2600 CE Report 2024-04-10
RoHS Certification ED-IPC2600 RoHS Certification 2024-04-10
RoHS Report ED-IPC2600 RoHS Report 2024-04-10
FCC Certification ED-IPC2600 FCC Certification 2024-04-10
FCC Report ED-IPC2600 FCC Report 2024-04-10
EU Declaration ED-IPC2600 EU Declaration 2024-04-10
Related Products
ED-HMI2120 Series

The ED-HMI2120 is a high-performance HMI device featuring a powerful quad-core processor, multiple connectivity options, and a choice between 7.0" and 10.1" touchscreen displays for industrial applications.

CM4 IO Computer

CM4 IO Computer is a compact and versatile industrial computer series based on the Raspberry Pi Compute Module 4, offering a range of RAM and storage options, dual HDMI 4K output, Gigabit Ethernet, USB 2.0 ports, and support for WiFi, Bluetooth, and PCIe expansion.

EDATEC

Started in 2017, EDATEC has been certified as one of the global design partners of Raspberry Pi since 2018, providing Raspberry Pi based industrial computers design and manufacturing services for global customers.

  • Building 29, No. 1661, Jialuo Road, Jiading District, Shanghai.
  • CN: +86-18217351262 (Iris Zhou)
    US: +1 859-653-0800 (Randall Restle)
  • support@edatec.cn
Submit Your Message

INFO

By submitting, you agree to EDATEC's policies

Please enter the verification code

captcha
0.767592s