En
Contact Us

Products

IPC Series HMI Series PLC Remote IO CM4 Industrial Computer IoT Gateway SBC Extension Boards CPU Modules Display Cameras Accessories

Solutions

Custom Design

Branding & Labeling Mechanical Design Hardware Design Software Design Manufacturing Services CM4 Programming

Docs

Rpi Developer

Support

Technical Support Warranty FAQs System Integration Partner Profile Software Framework Provider Profile

Company

About us Contact us Company privacy News

Partners

Distributors System Integration Parnters Software Framework Provider
Select Region/Language
EN CN

ED-IPC2400 Series

Home > Products > IPC Series

ED-IPC2400 Series

Communication-focused Industrial Computer with multi-channel RS232/RS485, optimized for industrial communications.

Key Featured
  • Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • Up to 8GB LPDDR4 RAM and 32GB eMMC storage
  • Lan supports up to 1Gbps
  • 1 x Gigabit Ethernet, 2 x USB 3.0 和 2 x USB 2.0
  • Support 1 x RS232 (options for 2 x RS232 or 3 x RS232) and 2 x RS485 (options for 3 x RS485 or 4 x RS485)
  • USB 3.0 supports up to 5Gbps
  • 2.4GHz and 5GHz dual-band Wi-Fi and Bluetooth
  • Support Micro-SD Card, integrated RTC, EEPROM and encryption chip
  • Wide voltage power input range of DC 9V~28V with reverse polarity protection, overvoltage protection and overcurrent protection
  • Wide temperature range of -25℃~60℃ for working environment
  • High-quality metal case, compatible with DIN-rail installation
Online Docs
IPC2400 Series Selection Guide
Model No.RS232RS485
IPC2410x 1x 4
IPC2420x 2x 3
IPC2430x 3x 2

The ED-IPC2400 series represents a line of industrial computers that leverage the Raspberry Pi CM4 platform, tailoring it for a variety of industrial application scenarios. These computers are anchored by the robust Broadcom BCM2711 processor, which features a quad-core Cortex-A72 architecture and operates on a 64-bit ARM v8 instruction set, running at a commendable 1.5GHz. This ensures that the ED-IPC2400 series can handle demanding tasks with ease.

Memory and storage configurations on the ED-IPC2400 series are flexible, with options for up to 8GB of LPDDR4 RAM and up to 32GB of eMMC storage. This is further supplemented by support for Micro SD cards, providing additional flexibility for data storage and operating system management.

For connectivity, the series boasts a 1Gbps-capable LAN port, an HDMI Type A port, two USB 3.0 ports which can handle data transfer rates up to 5Gbps, and a single USB 2.0 port. This robust set of interfaces is further expanded by multiple RS232 and RS485 ports, which can be configured according to specific industrial needs, with options for one, two, or three RS232 channels and two, three, or four RS485 channels.

Wireless communication is well catered for with dual-band 2.4GHz and 5GHz WiFi and Bluetooth 5.0 capabilities. Power input is designed to be versatile, with a wide-voltage input of 9V to 28V, complete with protection against over-current, over-voltage, and reverse connection. The ED-IPC2400 series also includes an integrated Real-Time Clock (RTC), an EEPROM, and an encryption chip, enhancing its functionality and security. A buzzer, reset button, and 8 LED indicators are also provided for operational feedback and control.

The operating temperature range of the ED-IPC2400 series is extensive, spanning from -25℃ to 60℃, making it suitable for both indoor and outdoor industrial applications. The physical design of the series is highlighted by a high-quality metal casing, which not only provides protection but also excellent heat dissipation. The casing is complemented by a DIN-rail mounting system, allowing for easy and secure installation in industrial environments.

Models within the ED-IPC2400 series, such as the IPC2410, IPC2420, and IPC2430, differ primarily in the number of RS232 and RS485 ports they offer, allowing customers to select the configuration that best fits their specific requirements. Overall, the ED-IPC2400 series is designed to provide a reliable, flexible, and high-performance computing solution for industrial applications.

More Products
ModelProcessorEthernetRS232/485CANDI/DO4G/5G LTE SupportADCSupercapPoESSD
ED-IPC2000CM4x 1------√√
ED-IPC2100CM4x 2x 4--4G-√√√
ED-IPC2200CM4x 3---4G-√√√
ED-IPC2400CM4x 1x 4-----√√
ED-IPC2500CM4x 3---5G-√--
ED-IPC2610CM4x 2x 4-x 8 / x 84G-√√√
ED-IPC2620CM4x 2x 4x 1x 4 / x 44G-√√√
ED-IPC2630CM4x 2x 4x 2x 8 / x 84G-√√√
ED-IPC3100CM5x 2x 4--4G-√√√
ED-IPC3630CM5x 2x 4x 2x 8 / x 84G-√√√
ED-IPC3020Pi 5x 1x 2--4G-√√√
ED-CM4SENCM4x 1x 5x 1-4G----
ED-CM4IOCM4x 1------√√
ED-CM4MEDCM4x 1---4G----
ED-CM4INDCM4x 2x 3-x 34Gx 3-√√
ED-CM4NANOCM4x 1------√√
ED-SBC2300CM4x 2x 9--4G--√√
ED-SBC2300CM5x 2x 9--4G--√√


System Diagram
ipc2400-system-diagram
Specification
System
CPUBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPUH.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
StorageOptions for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion)
software
Operating System Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Front I/O
Power1 x DC IN, DC Jack connector, supporting 9V~28V input.
HDMI1 x HDMI port, type A connector. It is compatibles with HDMI2.0 standard and supports 4K 60Hz.
1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
COM1 x RS232 port, DB9 male connector, using the 2, 3 and 5 pins, the corresponding signal is defined as RX/TX/GND.
RS4852 x RS485 ports, 4-Pin 3.5mm pitch phoenix terminals.The single signal is defined as A/B/GND.
RS485/2326-Pin 3.5mm pitch phoenix terminals, different numbers of RS232 and RS485 ports can beselected according to actual application. The signal of RS485 is defined as A/B/GND, and the signal of RS232 is defined as TX/RX/GND.
  • ED-IPC2410：2 x RS485
  • ED-IPC2420：1 x RS232 + 1 x RS485
  • ED-IPC2430：2 x RS232
Rear I/O
SD Card Slot1 x Micro-SD card slot, which is used to install SD card for storing user data.
Side I/O
USB 2.01 x USB 2.0 port, type A connector, which supports up to 480Mbps.
USB 3.02 x USB 3.0 ports, type A connector, each channel supports up to 5Gbps.
Antenna1 x SMA port, which is used to connect Wi-Fi/BT antenna.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
PROGRAM1 x PROGRAMMING button, which is used to flash to eMMC for the system.
PWR1 x red power indicator, using to check the status of device power-on and power-off.
ACT1 x green system indicator, using to check the working status of device.
USER1 x green user indicator, user can customize a status according to actual application.
COM1~ COM55 x green UART indicators, using to check the communication status of UART port.
Expansion I/O
12V 1A1 x DC OUT, 2-Pin 2.0mm pitch WTB connector, which supports 12V 1A output.
These pins are defined as GND/12V, reserving to provide power supply for extended LCD.
5V 1A1 x DC OUT, 3-Pin 2.0mm pitch WTB connector, which supports 5V 1A output.
These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
USB 2.01 x USB 2.0, 5-Pin 1.27mm pitch WTB connector, which supports to expand USB 2.0 port.
Expansion Performance
EEPROMSupports 4K byte storage and improves the ease of use of device.
Crypto AuthenticationIt can be matched to realize the required upper layer application and improves the security of device.
RTCEnsure that the system clock is not affected by device power-off.
Note: A CR1220 battery is provided by default in China.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Electrical Characteristics
Input Voltage9V ~ 28V DC
Power Consumption20W (Max)
Mechanical Characteristics
Dimensions103mm x 80.5mm x 50mm (WxDxH, antenna and DIN-rail bracket are not included)
Weight500g
InstallationDIN-rail mounting
Wireless
Wi-Fi/Bluetooth (optional) 2.4GHz and 5GHz dual-band Wi-Fi with antenna
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency
Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient humidity5% ~ 95% (non-condensing)
CertificationsFCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
Mechanicals

Unit: mm

ipc2400-dimensions
Ordering Code
ipc2400-ordering-code
Docs
Type Title Publish Time
Datasheet ED-IPC2400 Datasheet 2024-04-10
Manual ED-IPC2400 User Manual 2024-04-10
OS ED-IPC2400 Installing OS 2024-04-10
Related Products
ED-HMI2020 Series

ED-HMI2020 is a versatile industrial HMI device featuring a Raspberry Pi Compute Module 4, offering a high-resolution touch screen, robust wireless connectivity, and wide temperature operation for reliable industrial control applications.

CM4 Nano

CM4 Nano is a compact and powerful industrial computer based on the Raspberry Pi Compute Module 4, featuring versatile RAM and storage options, robust wireless communication, and extensive expansion capabilities for reliable operation in a wide range of temperatures.

ED-IPC2500 Series

The ED-IPC2500 is a high-performance industrial computer with 5G capability, featuring a powerful quad-core processor, ample I/O options, and a wide operating temperature range for versatile industrial applications.

ED-IPC2600 Series

ED-IPC2600 series is a robust set of industrial computers based on Raspberry Pi CM4, offering various models with different I/O configurations, dual Ethernet ports, isolated serial communication interfaces, and support for advanced control systems through optional CODESYS compatibility.

ED-IPC3020
  • M.2 SSD
  • Stereo Audio
  • PoE
  • RS232
  • RS485

EDATEC

Started in 2017, EDATEC has been certified as one of the global design partners of Raspberry Pi since 2018, providing Raspberry Pi based industrial computers design and manufacturing services for global customers.

  • Building 29, No. 1661, Jialuo Road, Jiading District, Shanghai.
  • CN: +86-18217351262 (Iris Zhou)
    US: +1 859-653-0800 (Randall Restle)
  • support@edatec.cn
Submit Your Message

INFO

By submitting, you agree to EDATEC's policies
NO
YES

GitHub

Phone

For enquiry or purchase of our products, please contact us:
CN: Iris Zhou
Tel: +86-18217351262
E-mail: izhou@edatec.cn

US: Randall Restle
Tel: +1 859-653-0800
E-mail: randall@edatec.cn

Form

Subscribe

Please enter the verification code

captcha
取消
确认
0.763357s